Your house is probably going your most dear asset, whether you got it latest or pre-owned. Over time, though, that asset becomes outdated, leading people to either buy a latest home, buy a more moderen used home, or remodel their existing home.
Remodeling your existing home can’t only be a satisfying journey, but it may well also prevent money on moving costs and, when done appropriately, make your private home more environmentally friendly. This trend, often called green remodeling or environmental remodeling, takes an older, outdated home and brings it as much as the newest eco-friendly standards.
How does environmental remodeling work? Learn all about it below.
What Is Green Remodeling?
Green remodeling — also called environmental remodeling — is whenever you consider the environmental impact when remodeling a house. Older homes built when energy efficiency standards were lower often offer enormous opportunities for green remodeling.
And since remodeling a house impacts the environment in some ways, you’ll be able to take part in the environmental construction wave in quite a few ways while updating an older home.
The steps you’ll be able to take to realize a green remodel include the ways you source materials, the kinds of materials you employ, and the design of the remodel itself. With all these opportunities to handle your remodel in an ecofriendly way, you might be wondering where to begin.
How Do You Remodel Eco-Friendly?
If you determine to tackle a home remodeling project and achieve this in an eco-friendly manner, you’ll be able to achieve this in some ways. Let’s review all of the environmental remodeling opportunities, from green constructing methods to sustainable constructing materials and beyond.
Select a Green General Contractor
Unless you’re a handy do-it-yourselfer, most homeowners rely on general contractors to tackle their green home improvement projects. Certifications are relatively common in general contracting, including those in green constructing methods.
Search for a general contractor with a number of green constructing certifications, reminiscent of a Green Certified Skilled certificate from the National Association of Home Builders or the National Association of the Remodeling Industry or a Skilled Credential from Leadership in Energy and Environmental Design (LEED).
These certificates are only pieces of paper, but they show a dedication to environmental construction. Nonetheless, the actual proof is within the remodeling contractor’s work and the subcontractors they hire.
Start Your Environmental Remodel From the Design Phase
While the constructing phase is a big a part of environmental construction, it remains to be just one part. One other big part is the passive environmental remodeling that may occur throughout the design phase.
This will include skylight placement to maximise natural lighting, limit energy use, and lower energy bills. It also encompasses heating, ventilation, and cooling duct routing, outlet placement, and window placement for optimum sunlight and natural heat within the winter.
It’s not only the interior design and constructing design that matters — landscaping design may also impact your green remodeling project. Tree placement, specifically, makes a giant difference.
Selecting trees with optimal shade creation in the summertime and placing them in the suitable place can significantly lower your cooling costs in the summertime. And selecting trees that also shed their leaves in the autumn and winter can maximize lighting and natural heat in your private home, further reducing energy costs. This makes deciduous trees a wonderful option on your green remodeling project.
Weaving the design process into your overall environmental remodeling goals can set your project up for optimum success.
Get an Energy Audit
On top of the design process, you’ll be able to further prepare on your green remodeling project with an energy audit. These audits — also often called energy assessments — perform quite a few tests to reveal inefficiencies in your private home. This will include measuring your furnace’s efficiency, checking for door seal and window seal leaks, performing thermographic scans of your private home, and rather more.
After the energy audit, you’ll have a clearer picture of what needs updating to maximise your private home’s efficiency after your environmental remodeling.
Use Sustainable Materials
One other solution to execute an environmental construction job is to make use of sustainable materials. These are constructing materials created from renewable sources or which might be from sources which might be sustainably harvested. This will include green cabinets on your kitchen remodel, composite boards — created from materials like recycled plastics — on your latest deck, bathroom fixtures, and even recycled insulation.
You too can ensure your environmental remodeling project is accomplished in probably the most sustainable way possible by deconstructing as an alternative of destroying materials. It could be satisfying to dive in with a sledgehammer and tear down all of the old materials, but you might be destroying materials you’ll be able to reuse. As an alternative, methodically deconstruct the old items and find anything reusable, reminiscent of wood beams, fixtures, and more.
For those who can reuse nothing in your private home, this doesn’t mean you have got to purchase all latest materials. You possibly can ensure sustainability by reusing high-quality items you’ll be able to source locally from other people’s renovations or reuse stores, reminiscent of Habitat for Humanity’s chain of ReStores. You too can find reusable items to suit a selected theme you’re targeting.
For instance, for those who need a rustic-themed lounge on your green home renovation, you would possibly consider wood from a razed barn or driftwood. These will be quality materials and offer great alternatives to purchasing latest wood and artificially aging it.
Upgrade Your Appliances and Utilities
Old houses generally have outdated appliances and utilities, including water heaters, fridges, stoves, dishwashers, air con, heating, and more. These old appliances are typically relatively inefficient and may impede green remodeling.
So, in case your environmental construction project has aging appliances and utilities, consider upgrading them to latest, more efficient ones. One example can be replacing your old tank-storage water heater with a more efficient tankless water heater.
The U.S. Department of Energy found tankless water heaters are 24-34% more efficient than tank-storage heaters in homes using 41 gallons of water or less every day. Nonetheless, in those using as much as 86 gallons of water every day, these tanks are still 8-14% more efficient. Plus, you’ll be able to install a heater at each outlet and save much more.
You too can go for a solar water heater, which uses no electricity and may reduce water heating-related electricity bills by 50-80%. And for those who actually need to go green in your renovation, consider renewable energy by retrofitting the house with solar panels.
While the initial investment could also be high, the long-term payoff to the environment and your wallet will be well value it. In fact, your savings can vary with solar panels, depending on sun exposure, electricity rates, solar system size, roof design, and even your electric company’s billing methods. So, confirm all these before committing to a rooftop solar panel system.
Use Upgraded Constructing Materials
Just like the appliances and utilities in your private home, the constructing materials you employ can significantly improve the success of your environmental remodeling project. While removing old constructing materials, consider upgrading to latest, more efficient options. These can include:
- Low-emissive (Low-E) glass windows: These windows have a microscopic film coating that reduces heat transfer. This will reduce energy loss by 30-50%. Plus, you’ll be able to have them customized to limit the daylight they let through. You should purchase all-new Low-E windows or add a Low-E coating to existing ones.
- Low-flow toilets: When low-flow toilets were made a law in 1994, the 1.6-gallon-per-flush limit often led to multiple flushes to work appropriately. Nonetheless, these toilets now function as expected with latest flushing technology and redesigned passageways. In accordance with the Environmental Protection Agency (EPA), replacing old toilets with latest low-flow options can reduce water consumption by 20-60% and prevent $140 per yr.
- Low-flow fixtures: Along with low-flow toilets, you’ll be able to integrate other low-flow water fixtures in your environmental remodeling project, reminiscent of showerheads and taps. These not only reduce water consumption, but additionally they reduce water heating costs and lower your utility bills. Low-flow faucets can reduce consumption by 30% or more, and low-flow showerheads can lower consumption by 20%.
- Recent Insulation: You need to replace or retrofit your private home with latest insulation once every 15-20 years for optimal efficiency, depending on the R-rating — the insulation’s resistance to heat and cold. In case your green remodeling project is a 15- to 20-year-old (or older) home, consider replacing the insulation and dramatically improving the house’s efficiency.
Buy Locally
A portion of the carbon footprint of a home remodel is in transporting materials. Fortunately, you’ll be able to limit this by buying as many home construction materials as possible locally. Out of your countertops on your bathroom remodel to the lumber, you’ll be able to source these materials nearby and eliminate the emissions created when shipping home constructing materials long distances.
On top of saving the emissions, you might be also helping support the local economy, so it’s a win on all sides.
What Should Be Kept in Mind When Renovating?
You’ll need to keep several things in mind when performing a green remodeling project. Let’s review a couple of of the more vital and oft-forgotten parts of an environmental remodeling project.
Get Your Green Credits
Lots of the upgrades you make in your green remodeling project might also have federal, state, or local credits available. For instance, installing a low-flow toilet can net you credits in your utility bill or credit check mailed to you, and all solar panel installs through 2032 are eligible for as much as a 30% tax credit.
This might help offset some extra costs related to a green remodeling project.
Find Free Options
Reclamation and reuse are great ways to make your environmental remodeling project more cost-effective. When people offer these reclamation items, reminiscent of wood from an old barn or old lumber from a disassembled garage, they simply want the scrap wood gone. This is a superb opportunity to get these materials without cost.
For instance, see if you have got a neighbor tearing down an old constructing with suitable reusable materials. In that case, you would possibly find a way to entice them to supply the old materials to you without cost by volunteering to assist with the teardown.
Cleanup Matters
While specializing in environmental health during construction matters greatly, don’t forget in regards to the cleanup. Confirm how your contractor plans to clean up your site and ensure it aligns with the green construction process in order that your entire process is eco-friendly.
Regardless of how green the method is, hazardous materials that may harm wildlife and human health, reminiscent of asbestos and more, should still be present. And also you’ll need to ensure it’s being disposed of in environmentally protected ways and never just getting dumped in a landfill or left to leach into the groundwater.
Is It Higher for the Environment to Construct Recent or Renovate?
Research shows that renovation is best for the environment than a latest construct, and this is just compounded whenever you’re committed to an environmental remodeling project. It is because of the greenhouse gasses released throughout the materials’ lifecycle, including all the pieces from extracting the raw materials from the Earth to transporting them to the physical construction process.
For those who’re remodeling as an alternative of constructing latest, far fewer net-new raw materials will go into the project. That is much more significant within the case of a green remodeling project that focuses on reusing and reclaiming materials.
Also, for those who’re replacing old water fixtures, like toilets, showerheads, and taps, with latest low-flow options, you’re limiting your consumption and retiring a high-consumption fixture. This implies a net reduction in overall consumption by the renovated home. In contrast, a latest home is an overall increase in consumption, albeit at a lower rate than an older home without upgrades.
Your Environmental Remodeling Project Can Make a Big Impact
If you tackle a remodeling project, you have got the potential to extend your property value and the property values in the encircling area. Add the incontrovertible fact that you’re doing an environmental remodeling project, and the advantages are multiplied.
You and your neighbors enjoy improved values, and you’ll be able to feel good knowing your renovations made this old home more environmentally friendly.
Want to scale back your carbon footprint further and help slow climate change? Consider purchasing carbon removal credits from Terrapass. We provide carbon reduction credits to offset every kind of activity, from travel to weddings.
Dropped at you by terrapass.com
